Crestron electronic GLPS-SW-FT manual Universal Mounting Plates, GreenLight Options–CAENEnclosures

Models: GLPS-HSW-FT GLPS-HDSW-FT GLPS-HSW GLPS-SW-FT GLPS-SW IPAC-GL1

1 108
Download 108 pages 57.08 Kb
Page 44
Image 44
Universal Mounting Plates

Crestron Commercial Lighting Design Guide

GreenLight Options–CAEN Enclosures

Universal Mounting Plates

Crestron Universal Mounting Plates (CAEN-UMP Series) are a complete line of accessory plates, which allow mounting of non-Crestron equipment to any Crestron Automation Enclosure (CAEN Series). Third-party products such as phone and alarm systems can be mounted to these plates. The advantage to using the CAEN-UMP is that a variety of sizes are available and each plate occupies the same area as one, two or four Crestron lighting modules (CLX-series).

The size corresponds to the number of module spaces and their arrangement within the enclosure. For example, CAEN-UMP2X2 occupies four module positions and CAEN-UMP1x1 occupies one module position. The others (CAEN-UMP2X1 and 1X2) occupy two module positions. Refer to the illustration for an example of plate location and orientation within a double-wide enclosure. The table below lists the dimensions and weight for each CAEN-UMP model. The CAEN-UMP must be mounted in accordance with all national and local codes.

Use the four supplied (8x1/4”) screws to attach a CAEN-UMP to an enclosure. Crestron recommends that the keyholes on the plates be located toward the outer edge of the enclosure,as shown in the illustration. As a result, the flanges of the plates do not overlap each other when positioning any combination of

CAEN-UMP2X1s, CAEN-UMP1X1s, or lighting modules side-by-side in an enclosure.

NOTES: Adhere to Class 1 versus Class 2 wiring requirements when considering the equipment attached to the CAEN-UMP in an enclosure.

Third-party equipment attached to a CAEN-UMP within a Crestron Automated

Enclosure should not be considered part of the Crestron system.

CAEN Universal Mounting Plate

2X2

2X1

1X2

1X1

Weight

Height

Width

Depth

22.6

15 1/8

14

12.012.4

15

1/

8

 

7

7/

16

6

15/

16

 

14

 

 

 

 

 

5/

8

 

 

6.6

77/16

6 15/16

Dimensions are provided in inches, edge to edge.

Weight is provided in ounces.

Doc. 4775A

40

Page 44
Image 44
Crestron electronic GLPS-SW-FT, IPAC-GL1, GLPS-HSW Universal Mounting Plates, Crestron Commercial Lighting Design Guide