Crestron electronic GLPS-SW-FT DIN-8SW8, DIN-4DIMFLV4, DIN-2MC2, DIN Rail Products, Features

Crestron Commercial Lighting Design Guide DIN Rail Products

DIN-8SW8

The DIN-8SW8 is an 8-channel high voltage lighting control module designed to support switching of non-dimmable lighting and fans. A single model supports both 120 and 220- 240 volt applications. Each channel handles incandescent loads up to 10 amps, fluorescent loads up to 5 amps, and also 1/2 HP motors.

Features

 8 channels of power switching

 Supports 120 to 240 volt 50/60 Hz (Not for 277 VAC operation)

 Override input

 Cresnet® communications

 Setup via front panel or software

 Programmable functionality via DIN-AP2

DIN-4DIMFLV4

The DIN-4DIMFLV4 is a 4-channel lighting control module designed to support dimming of 4-wire 0-10 volt fluorescent dimming ballasts. A single model supports both 120 and 220-240 volt applications. Each channel handles up to 30 dimmable ballasts, and may also be used for switching of non-dimmable lighting loads up to 5 amps, as well as 1/2 HP motors.

Features

 4 channels of 4-wire 0-10 volt fluorescent dimming

 Supports 120 to 240 Volt 50/60 Hz (Not for 277 VAC operation)

 Also allows switching of lighting and exhaust fans  Setup via front panel or software

 Programmable functionality via DIN-AP2

DIN-2MC2

The DIN-2MC2 is a 2-channel motor control module designed to provide control of bidirectional motors for drapes, shades, projection screens, lifts, skylights, and gates. Each channel supports up/down or open/close control of a conventional 3-wire bidirectional type motor up to 1/2 HP at voltages up to 240 volts. Built-in timing and interlock logic make it easy to program the DIN-2MC2 for failsafe operation.

Features

 Dual-channel bidirectional motor control  Supports 120 to 240 volt 50/60 Hz

 Setup via front panel or software

 Programmable functionality via DIN-AP2

Doc 4775A 52