Crestron electronic GLPS-SW Override, Crestron Commercial Lighting Design Guide, Memory Expansion

Crestron Commercial Lighting Design Guide Control Processors

Override

An override input is provided to allow an external contact closure to bypass the PAC2M and activate a preset override state in each connected lighting module. A signal is passed to the lighting modules via the fifth wire of the interconnect cable, and the lights are turned on to a programmed preset emergency level.

Memory Expansion

A memory card slot allows for easy expansion of the PAC2M's internal memory using any MMC-compatible memory card up to 1 GB.

Double Width Enclosure Mounting

Module and associated terminal block installed in double width enclosure. The PAC2M processor occupies the lowest module position in either the single or double enclosure.

For additional information, refer to the PAC2M

Operations Manual, Doc. 6507.

Doc. 4775A 81