Crestron electronic GLPS-SW-FT, IPAC-GL1, GLPS-HSW manual GLA-PWS50, Green Light Power Switching

Models: GLPS-HSW-FT GLPS-HDSW-FT GLPS-HSW GLPS-SW-FT GLPS-SW IPAC-GL1

1 108
Download 108 pages 57.08 Kb
Page 32
Image 32
GLA-PWS50

Green Light Power Switching

Crestron Commercial Lighting Design Guide

GLA-PWS50

Wall Mount 50 Watt Cresnet Power Supply

The GLA-PWS50 is a 50 watt Cresnet power supply designed for use with a Crestron Green Light system, or anywhere a wall-mountable Cresnet power supply is needed. The GLA- PWS50 mounts conveniently over a 4" square or 2-gang electrical box. All connections are made inside the electrical box via flying leads using wire nuts. A partition is included to isolate Class 1 from Class 2 wiring within the box.

50 watt Cresnet power supply

Powers the IPAC and other Cresnet devices

Provides power for Crestron Green Light panels

Mounts to a 4" square or 2-gang electrical box

SPECIFICATIONS

Output Power

Output Power: 50 Watts (2.08 Amps) @ 24 Volts DC, regulated, limited power source

Ripple/Noise: <1%

Power Requirements

Line Power: 60 Watts @ 100-240 Volts AC, 50/60 Hz

Environmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Heat Dissipation: 26 BTU/hr

Enclosure

Metal construction, mounts to a 4-inch square or 2-gang electrical box,

includes low-voltage partition

Testing & Compliance

UL Listed, FCC Part 15

Doc.4775A

28

Page 32
Image 32
Crestron electronic GLPS-SW-FT, IPAC-GL1 GLA-PWS50, Green Light Power Switching, Crestron Commercial Lighting Design Guide