Crestron electronic GLPS-HSW-FT, IPAC-GL1 Crestron Commercial Lighting Design Guide, Load Ratings

Models: GLPS-HSW-FT GLPS-HDSW-FT GLPS-HSW GLPS-SW-FT GLPS-SW IPAC-GL1

1 108
Download 108 pages 57.08 Kb
Page 23
Image 23
Load Ratings

Crestron Commercial Lighting Design Guide

Green Light Power Switching

GLPS-SW (CONTINUED)

SPECIFICATIONS

Load Ratings

Switch Channels: 10 to 42 depending upon panel size and options, each channel

phase-independent

Maximum per Channel: 16 Amps @ 100 to 277 Volts AC, 50/60 Hz; 1 HP @ 120 Volts,

2 HP @ 277 Volts

Switched Load Types: Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent Lamp Ballast, High-Intensity Discharge, Motors

Dimmed Load Types (special order): 0-10 Volt 4-Wire Dimmable Fluorescent Ballast

Rated Relay Lifetime: 10,000 cycles at full rated electronic ballast load

Input Power

Line Power:120/208 VAC, 225 Amps maximum, 50/60 Hz phase-to-neutral, or 277/480 VAC, 250 Amps maximum, 50/60 Hz phase-to-neutral

Cresnet Power Usage (optional): 50 Watts (2.08 Amps @ 24 Volts DC) per panel, use Crestron GLA-PWS50 or equivalent power supply

Circuit Breakers

Branch, 120V: 20A Square D® QOB Bolt-on type; 10k, 22k, or 65k AIC rated as required

Branch, 277V: 20A Square D® EDB, EGB, EJB E-Frame type; 18k, 35k, or 65k AIC rated as required

Main, 120/208V (optional): 120/208V: 60A, 80A, or 100A Square D® QOB Bolt-on type; 10k AIC rated (consult Crestron for additional options)

Main, 277/480V (optional): 60A, 80A, 100A, or 125A Square D® EDB, EGB,

EJB E-Frame type; 18k, 35k, or 65k AIC rated

Lightning Protection

Can withstand 6 kV / 3 kA surge, as per IEC 61000-4-5 and ANSI/IEEE C62.41-1991

Enclosure

NEMA Type 1, IP20 rated protection, for indoor use only Back Box: 16 Gauge galvanized steel, surface wall mount Front Cover: 16 Gauge steel, grey powder coat finish

Environmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Dimensions

Small: 37-1/2 x 20-1/4 x 6-5/8 in (95.25 x 51.4 x 16.8 cm)

HWD

Medium: 70 x 20-1/4 x 6-5/8 in (177.8 x 51.4 x 16.8 cm)

HWD

Large: 78-15/16 x 20-1/4 x 6-5/8 in (200.5 x 51.4 x 16.8 cm)

HWD

Weight

Fully loaded with modules, 277V circuit breakers, and wiring: Small: 70 lb (31.8 kg) maximum

Medium: 140 lb (63.5 kg) maximum

Large: 165 lb (74.9 kg) maximum

Testing & Compliance

UL Listed, FCC Part 15

Doc. 4775A

19

Page 23
Image 23
Crestron electronic GLPS-HSW-FT manual Crestron Commercial Lighting Design Guide, Green Light Power Switching, Load Ratings