Crestron electronic GLPS-HSW-FT manual Cresnet Wall Box Dimmers, Model, Load, Features, Doc 4775A

Wall Box Dimmers and SwitchesCommercial Lighting Design Guide

Cresnet Wall Box Dimmers

Model	Load		Features
CLW-DIM		Supports incandescent		Four possible dimming level presets. The slide
Wall Box Dimmer		loads up to 1000 watts,		switch selects between ADJUST, PRESET, and
(Stand-alone)		or magnetic low voltage		OFF modes
		loads up to 1000VA/750 Watts
CLW-DIM1		Supports incandescent		Two possible dimming level presets. The slide
Wall Box Dimmer,		loads up to 1000 Watts,		switch selects between ADJUST, PRESET, and
Single Button		or magnetic low voltage		OFF modes
(Stand-alone)		loads up to 1000VA/750 Watts
CLW-DIMS		Supports incandescent		Four possible dimming level presets. The slide
Wall Box Master		loads up to 1000 Watts,		switch selects between ADJUST, PRESET, and
Dimmer		or magnetic low voltage		OFF modes. Serves as the master for multi-
(Master)		loads up to 1000VA/750 Watts		point dimming control of a single load. Multi-
				point dimming (similar to 3-way or 4-way
				switching) is enabled using one CLW-DIMS
				with one or more CLW-SLVD Slave Dimmers.

NOTE: In multipoint systems, only the master unit is connected to Cresnet. Slave units are connected by the120V (Traveler) wire.

CLW-SLVD	Supports incandescent	One-gang wall mount slave dimmer designed
Wall Box Slave	loads up to 1000 watts,	for use with the CLW-DIMS Wall Box Master
Dimmer	or magnetic low voltage	Dimmer to provide multi-point dimming control
(Slave)	loads up to 1000VA/750 watts	of a single load.
		The three pushbuttons on the CLW-SLVD
		provide parallel functionality to those on the
		CLW-DIMS
CLW-DIMS1	Supports incandescent	Serves as the master for multi-point dimming
Wall Box Master	loads up to 1000 Watts,	control of a single load. Multi-point dimming
Dimmer, Single	or magnetic low voltage	(similar to 3-way or 4-way switching) is
Button	loads up to 1000VA/750 watts	enabled using one CLW-DIMS1 with one
(Master)		or more CLW-SLVD1 Slave Dimmers
		Two possible dimming level presets. The slide
		switch selects between ADJUST, PRESET, and
		OFF modes
CLW-SLVD1	Supports incandescent	One-gang wall mount slave dimmer designed
Wall Box Slave	loads up to 1000 watts,	for use with the CLW-DIMS1 Wall Box Master
Dimmer, Single	or magnetic low voltage	Dimmer to provide mult-point dimming control
Button	loads up to 1000VA/750 watts	of a single load
(Slave)		The single pushbutton on the CLW-SLVD1
		provides parallel functionality to that on the
		CLW-DIMS1

NOTE: In Multigang installation the inner tabs must be removed to fit and the load capacity must be derated. See table below for derating information for various applications.

Derating Information for Incandescent and Tungsten Halogen Applications

Part Number	No Side Removed
-DIM1	1000W
-DIMS1	1000W
-SLVD1

One Side Removed	Two sides removed
600W	400W
600W	400W
No Derating Necessary

Derating Information for Magnetic Low Voltage Applications

Part Number	No Side Removed
-DIM1	1000VA/ 750W
-DIMS1	1000VA/750W
-SLVD1

One Side Removed	Two sides removed
600VA/450WW	400VA/300W
600VA/450W	400VA/300W
No Derating Necessary

Doc 4775A 73