Installing the VoIP V3 Indoor Intercom 25
Log in to the Configuration Home Page
3. On the Home Page, review the setup details and navigation buttons described in Table
| Table |
|
|
Web Page Item | Description |
|
|
Device Settings |
|
|
|
Device Name | Shows the device name. |
|
|
Change Username | Type in this field to change the username. |
|
|
Change Password | Type in this field to change the password. |
|
|
Type the password again in this field to confirm the new | |
| password. |
|
|
Current Settings |
|
|
|
Serial Number | Shows the device serial number. |
|
|
Mac Address | Shows the device Mac address. |
|
|
Firmware Version | Shows the current firmware version. |
|
|
IP Addressing | Shows the current IP addressing setting (DHCP or static). |
|
|
IP Address | Shows the current IP address. |
|
|
Subnet Mask | Shows the current subnet mask address. |
|
|
Default Gateway | Shows the current default gateway address. |
|
|
DNS Server 1 | Shows the current DNS Server 1 address. |
|
|
DNS Server 2 | Shows the current DNS Server 2 address. |
|
|
Speaker Volume | Shows the current speaker volume level. |
|
|
Microphone Gain | Shows the current microphone gain level. |
|
|
SIP Mode is | Shows the current status of the SIP mode. |
|
|
Multicast Mode is | Shows the current status of the Multicast mode. |
|
|
Event Reporting is | Shows the current status of the Event Reporting mode. |
|
|
Nightringer is | Shows the current status of the Nightringer mode. |
|
|
Primary SIP Server | Shows the current status of the Primary SIP Server. |
|
|
Backup Server 1 | Shows the current status of Backup Server 1. |
|
|
Backup Server 2 | Shows the current status of Backup Server 2. |
|
|
| Click the Save button to save your configuration settings. |
| Note: You need to reboot for changes to take effect. |
|
|
| Click on the Reboot button to reboot the system. |
|
|
Operations Guide | 930500E | CyberData Corporation |
