Installing the VoIP V3 Indoor Intercom 36
Configure the Nightringer Parameters
2.4.7 Configure the Nightringer Parameters
When the Nightringer is enabled, the Intercom will register as a second SIP extension. Registration does not have to be to the same server as the primary SIP registration. Any calls made to the Nightringer extension will cause the Intercom to play a ring tone. There is no way to answer this call. The Nightringer is designed to be used in buildings where calls made after hours are directed to a ring group.
GENERAL ALERT
Caution
Nightringer requires SIP Registration. Nightringer cannot be used in peer to peer mode.
1.Click on the Nightringer button to open the Nightringer Configuration page. See Figure
Figure 2-18. Nightringer Configuration Setup
Operations Guide | 930500E | CyberData Corporation |
