CyberData 11113, 11111 manual Audio Files

	Installing the VoIP V3 Indoor Intercom 45
	Configure the Audio Configuration Parameters
	Table 2-15. Audio Configuration Parameters
Web Page Item	Description
Audio Files
0-9	The name of the audio configuration option is the same as the spoken audio that
	plays on the board (24 character limit).
	'0' corresponds to the spoken word “zero.”
	'1' corresponds to the spoken word “one.”
	'2' corresponds to the spoken word “two.”
	'3' corresponds to the spoken word “three.”
	'4' corresponds to the spoken word “four.”
	'5' corresponds to the spoken word “five.”
	'6' corresponds to the spoken word “six.”
	'7' corresponds to the spoken word “seven.”
	'8' corresponds to the spoken word “eight.”
	'9' corresponds to the spoken word “nine.”
Dot	Corresponds to the spoken word “dot.” (24 character limit)
Audiotest	Corresponds to the message “This is the CyberData IP speaker test message...”
	(24 character limit)
Page tone	Corresponds to a simple tone used for beep on initialization and beep on page (24
	character limit).
Your IP Address is	Corresponds to the message “Your IP address is...” (24 character limit).
Rebooting	Corresponds to the spoken word “Rebooting” (24 character limit).
Restoring default	Corresponds to the message “Restoring default” (24 character limit).
Ringback tone	This is the ringback tone that plays when calling a remote extension
	(24 character limit).
Ring tone	This is the tone that plays when set to ring when receiving a call
	(24 character limit).
Intrusion Sensor Triggered	Corresponds to the message “Intrusion Sensor Triggered” (24 character limit).
Door Ajar	Corresponds to the message “Door Ajar” (24 character limit).
Night Ring	Specifies the ringtone for nightring. By default this parameter uses the same audio file
	that is selected for the Ring Tone parameter.
	The Browse button will allow you to navigate to and select an audio file.
	The Play button will play that audio file.
	The Delete button will delete any user uploaded audio and restore the stock audio
	file.
	The Save button will download a new user audio file to the board once you've
	selected the file by using the Browse button. The Save button will delete any pre-
	existing user-uploaded audio files.

Operations Guide 930500E CyberData Corporation