D-Link DIR-455 manual PPPoE

Section 3 - Configuration

PPPoE

Choose this Internet connection if your ISP provides you PPPoE account.

Username:	The username/account name that your ISP provides
	to you for PPPoE dial-up.
Password:	Password that your ISP provides to you for PPPoE
	dial-up.
Verify Password:	Fill in with the same password in Password field.
Service Name:	(Optional) Fill in if provided by your ISP.
IP Address:	(Optional) Fill in if provided by your ISP. If not, keep
	the default value.
Primary DNS Server:	(Optional) Fill in if provided by your ISP. If not, keep
	the default value.
Secondary DNS Server:	(Optional) Fill in if provided by your ISP. If not, keep the default value.
MAC Address:	MAC address of WAN interface. You can also copy MAC address of your PC to its WAN interface by pressing
	Clone Your PC’s MAC button. The Restore MAC button will reset the router to its default MAC address.
Maximum Idle Time:	The amount of time of inactivity before disconnecting established PPPoE session. Set it to zero or enable
Maximum Transmission	Auto-reconnect will disable this feature.
Unit (MTU):	The default setting of PPPoE is 1492.
Auto-reconnect:	The device will dial-up PPPoE connection automatically.
	Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.

D-Link DIR-455 User Manual 17