Section 3 - Configuration

PPTP

Choose this Internet connection if your ISP provides you PPTP account.

Address Mode:

Choose Static IP only if your ISP assigns you an IP

 

address. Otherwise, please choose Dynamic IP.

PPTP IP Address:

Enter the information provided by your ISP.

 

(Only applicable for Static IP PPTP.)

PPTP Subnet Mask:

Enter the information provided by your ISP.

 

(Only applicable for Static IP PPTP.)

PPTP Gateway IP Address:

Enter the information provided by your ISP.

 

(Only applicable for Static IP PPTP.)

PPTP Server IP Address:

IP address of PPTP server.

Username:

User/account name that your ISP provides to you for PPTP dial-up.

Password:

Password that your ISP provides to you for PPTP dial-up.

Verify Password:

Fill in with the same password in Password field.

Reconnect Mode:

Choose Always-onwhen you want to establish PPTP connection all the time. If you choose Connect-on-

 

demand, the device will establish PPTP connection when local users want to surf Internet, and disconnect if

 

no traffic after time period of Maximum Idle Time.

Maximum Idle Time:

The time of no activity to disconnect your PPTP session. Set it to zero or choose Always-on to disable this

 

feature.

 

Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.

D-Link DIR-455 User Manual

18

Page 22
Image 22
D-Link DIR-455 manual Address Mode, Pptp IP Address, Pptp Subnet Mask, Reconnect Mode