Section 3 - Configuration
Routing
The Routing page allows you to specify custom routes that determine how data is moved around your network.
| RIP SETTING |
RIP: | Select this box to enable routing. |
| Ripv1: Protocol in which the IP address is |
| routed through the internet. |
| RIPv2: Enhanced version of RIPv1 with added |
| features such as Authentication, Routing |
| Domain, Next Hop Forwarding, and Subnet- |
| mask Exchange. |
| ROUTING RULES |
ID: | Identifies the rule. |
Destination: | Enter in the IP of the specified network that you |
| want to access using the static route. |
Subnet Mask: | Enter in the subnet mask to be used for the |
| specified net work. |
Gateway: | Enter in the gateway IP address to the specified network. |
Hop: | Enter in the amount of hops it will take to reach the specified network. |
| Note: In a transmission path, each link is terminated at a network device such as a router or gateway. The |
| number of hops equals the number of routers or gateways that data must pass through before reaching the |
| destination. |
Enable: | Select this box to enable the rule. |
|
|
49 |
