D-Link DIR-455 manual Wireless Security Mode

Section 3 - Configuration

Wireless Channel:	Indicates the channel setting for the DIR-
	455. By default the channel is set to 11.
	This can be changed to fit the channel
	setting for an existing wireless network or
	to customize your wireless network. Click
	Auto Channel Scan to automatically
	select the channel that it will operate on.
	This option is recommended because
	the router will choose the channel with
	the least amount of interference.
Visibility Status:	Select Invisible if you do not want the
	SSID of your wireless network to be
	broadcasted by DIR-455. The SSID
	of your router will not be seen by Site
	Survey utilities. Therefore while setting
	up your wireless clients, you will have
	to manually enter your SSID to connect
	to the router.
	WIRELESS SECURITY MODE
Security Mode:	This device supports three wireless security modes, WEP, WPA-Personal, WPA-Enterpriseor None. WEP
	is the original wireless encryption standard. WPA provides a higher level of security and WPA-Personal
	does not require an authentication server. When WPA enterprise is enabled, the router uses EAP (802.1x) to
	authenticate clients via a remote RADIUS server.
Radius Server IP:	IP address of RADIUS server.
Radius Port:	The port used for RADIUS server. The default port is 1812.
Radius Shared Key:	Key value shared by RADIUS server and this device.
	Please refer to Section 4 - Wireless Security for more information on security and encryption.
	Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
D-Link DIR-455 User Manual	25