Section 3 - Configuration
Inbound Filter
Inbound Filter enables you to control what packets are allowed to pass the router. Inbound filter only applies to packets that are destined for Virtual Servers or DMZ hosts.
INTBOUND FILTER SETTING
Inbound Filter: Select this box to Enable the filter.
Use Schedule Rule: You may select Always On or choose the number of a schedule rule that you have defined.
Copy to ID: Copies the predefined filter to the specified ID
INBOUND FILTER RULES LIST
ID: Identifies the filter.
Source IP : Ports: Specify the local IP address and then specify the port after the colon.
Destination IP : Ports: Specify the remote IP address and then the port after the colon.
Enable: Select this box to enable the filter.
Schedule Rule #: Specify the schedule rule number.
Previous Page: Go back to the previous filter page.
Next Page: Advance to the next filter page.
Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
47 |
