Section 3 - Configuration
| Tunnel 1 - Manual Key |
Choose MANUAL in the Method field, and press the More button to continue following configuration. | |
Tunnel Name: | Indicate a tunnel name for this VPN configuration. |
Local Subnet: | The subnet of the VPN gateway’s local network. It can be a host, a partial subnet or a whole subnet. |
Local Netmask: | Local netmask combined with local subnet to form a subnet domain. |
Remote Subnet: | The subnet of the remote VPN gateway’s local network. It can be a host, a partial subnet, or a whole subnet. |
Remote Netmask: | The netmask of the remote VPN gateway’s local network. |
Remote Gateway: | The WAN IP address of remote VPN gateway. |
Life Time: | The unit of life time is based on the value of Life Time Unit. The value of unit is second, the value of life time |
| represents the life time of dedicated VPN tunnel between both end gateways. Its value ranges from 300 |
| seconds to 172,800 seconds. |
Encapsulation Protocol: | Select ESP or AH. |
Local SPI: | SPI is an important parameter during hashing. Local SPI will be included in the outbound packet transmitted |
| to WAN side of local gateway. The value of local SPI should be set in hex format. |
34 |
