D-Link DWL-1800 user manual Verifying Correct Operation of the Outdoor Unit

2.6.2 Verifying Correct Operation of the Outdoor Unit

To verify proper operation, check the LED indicators located on the bottom panel of the outdoor unit.

Name	Description	Functionality
WLAN	Wireless Link	Blinking Green – Data received or
	Indicator	transmitted on the wireless link. Blinking
		rate is slower when there is less wireless
		traffic.
DC Power	Self Test and Power	Green – Power is available and self test
	indication	passed.
		Red – Self test failed. Firmware did not
		load successfully.
ETH	Ethernet activity/	OFF –Ethernet connectivity is OK.
	connectivity indication	No traffic activity detected on the port.
		Blinking Green –Ethernet connectivity is
		OK, with traffic on the port.
		Red – No Ethernet connectivity. When
		this state occurs, check the Ethernet cable
		and Indoor-to-Outdoor cable connections.
RSSI		DWL-1800R:Received Signal Strength
BAR		Indication
		DWL-1800B:Number of associated
		RB-DWL-1800R units

Table 2: Outdoor Unit LEDs

What to do if the Self Test fails

If the Self-Test failed (DC Power LED light remains red), try the following:

??Reset unit (Disconnect/reconnect the power).

??Check the Indoor-to-Outdoor cable.

??Reset to factory defaults (see page 42).

??Contact technical support.

17