D-Link DWL-1800 user manual Packing List, Installation Overview

2. INSTALLATION

2.1 Packing List

Verify that all of the following items are included with the unit:

??Indoor unit.

??Outdoor unit (includes integrated antenna).

??Pole mounting kit for the Outdoor unit (includes two brackets and four sets of screws, nuts and washers).

??110/220 VAC Power Cord.

??20 meter Indoor-to-Outdoor cable.

??3 shielded RJ-45 connectors.

??Configuration Utility CD including manual.

2.2Installation Overview

1.Select appropriate locations for the outdoor unit, the antenna and the Indoor unit.

2.Mount the outdoor unit.

3.Connect a ground cable from the outdoor unit to an appropriate grounding point.

4.Connect the Indoor-to-Outdoor cable to the outdoor unit and route it to the location selected for the indoor unit. Refer to Appendix B for instructions on preparing the Indoor-to-Outdoor cable.

5.Mount the indoor unit. Connect the Indoor-to-Outdoor cable to the indoor unit’s Radio port.

6.Connect the indoor unit’s Ethernet port to the user’s network using an Ethernet cable.

7.Configure the unit’s parameters.

8.Align the antenna and verify connectivity with any other units.

NOTE: The indoor unit should be connected to the power source only after it has been connected to the outdoor unit.

4