3.3 Resetting the SNMP Community Strings
The SNMP Read/Write Community strings are an SNMP security feature to restrict management access to authorized persons only. Refer to Section 3.2.1.1.2
To reset the SNMP community strings, insert a paper clip or another suitable tool into the Reset button on the top panel of the unit while the unit is operating. The community strings are reset to the default values, private (Write) and public (Read).
3.4 Reloading Factory Default Settings
To reset the unit to the factory defaults:
1.Disconnect the power cable from the indoor unit.
2.Insert a paper clip or another suitable tool into the Reset button on the top panel of the unit (see Figure 8 on page 14). Keep the Reset button pressed while inserting the power cable back into its socket.
42
