3.5Flash Memory Expansion
The printer can be equipped with the optional Flash Memory Expansion. This additional memory can be used to store label formats and fonts (for font downloading instructions, see Section 5.8).
To install the Flash Memory Expansion:
1. Turn the power off and unplug the printer. Remove any installed media from the printer.
2. Using a coin, flathead screwdriver, or similar object, insert it into the Slot on the underside of the printer and gently pry the Expansion Cover from the printer.
3. With its connector facing down, as shown, gently insert the Flash Memory Expansion Assembly into the Expansion Bay until the assembly is firmly seated.
4. Plug in and turn on the printer.
;Note: When using a blank expansion module for the first time, the printer will automatically format it upon
| 17 |
