4.2Buttons
The three buttons (PAUSE, FEED and CANCEL) perform different functions based on the printer’s operational mode. The printer operates in one of the following modes:
Normal: Normal printer functions. See Section 4.3.
Printer Setup: Allows changes to the printer’s operational settings. See Section 4.4.
Calibration: Allows the ‘calibration’ of the media being used for the correct sensing of the top of form. See Section 4.6.
4.3Normal Mode - Button Functions
In ‘Normal’ mode, the printer’s buttons control normal operations such as pause, feed, and cancel, as well as the test and reset functions by using button combinations as detailed below.
Normal Mode
(Normal
F1
F2 Feeds one label. Also, clears fault conditions.
F2 Press and hold to perform Label Alignment; see Section 4.5.
F3 Cancels the current batch of labels. Press the Pause button to print the next batch of labels (if any) in the print buffer.
Button Combinations (push buttons simultaneously)
+ | Prints the Test Label, see Section 4.7.2. |
+Performs a warm reset and returns to the Normal Mode of operation.
+ | Produces Database Configuration and Dot Check Labels. | ||
|
|
|
|
20 | |||
