symptoms that are likely to be keyboard-related. Some- times, the configuration of a program changes the function of a key or key combination. Similarly, key con- figuration programs like ProKey can change a key’s function. Because these programs are memory resident, be sure to clear them out of the computer’s memory before running a subtest in the Keyboard test group. (Clear them from memory by booting the computer from the Dell Diagnostics Diskette.) When these possibilities have been eliminated, and if the following symptoms occur, you should run one or more of the subtests in the Keyboard test group:

When you press a key, the character represented by that key appears repeatedly; the key seems to be stuck. Run the Stuck Key Test.

When you press a key and the response is different from the usual response or the response you antici- pated, the key contact may be damaged. Run the Keyboard Interactive Test.

When a key does not work at all, run all of the sub- tests in the Keyboard test group.

Subtests

The four keyboard subtests confirm the following key- board functions:

Keyboard Controller Test

Confirms the ability of the keyboard controller chip to communicate with the keyboard and confirms the programming of the controller chip

Keyboard Key Sequence Test

Verifies that the keys on the keyboard function cor- rectly when you press them in a predefined order

Keyboard Interactive Test

Checks the internal microcode of the keyboard and the external interface of the keyboard controller chip for a malfunctioning key

Stuck Key Test

Checks the internal microcode of the keyboard and the external interface of the keyboard controller chip for a repeating key signal

Mouse Test

The Mouse test checks the functionality of the mouse con- troller (which affects the ability to move the touch pad/ mouse pointer around the screen with its corresponding movement on your desk or pad) and the operation of the touch pad/mouse buttons.

Why Run the Mouse Test?

Touch pad or mouse problems are as likely to be caused in RAM as they are to be caused by a faulty touch pad or mouse. Three sources of problems include the configura- tion of a program (which changes the function of the touch pad or mouse), memory-resident programs like Sidekick or ProKey, and failure of a device driver (the software that controls the functions of a touch pad or mouse). If these possibilities have been eliminated and the following symptoms persist, run the Mouse test:

When you press a touch pad or mouse button, the func- tion of the button continues; the button seems to be stuck.

If the response when you press a touch pad or mouse button is different from the usual response or the response you anticipated, the button contact may be damaged.

A touch pad or mouse button does not work at all.

The cursor does not respond on the screen in accor- dance with the movements you make with the touch pad or external mouse.

Subtests

There are no subtests for the Mouse test.

Diskette Drives Test Group

The subtests in the Diskette Drives test group allow you to test diskette drives of all capacities.

NOTES: Before running the Diskette Drives test group, install a CD-ROM drive in the options bay and attach the diskette drive to the parallel connector on the back of the computer. The subtests in the test group will fail if you do not have a diskette drive attached to the parallel connector.

Running the Dell Diagnostics

4-15

Page 81
Image 81
Dell 3000 manual Diskette Drives Test Group, Why Run the Mouse Test?