When set to Disabled, you can disable the port and free its assigned LPT address for another device.
When set to Enabled, you configure the port settings. If for some reason you need to change the parallel port address and/or DMA channel, be careful not to create a conflict with the address or DMA channel of the infrared port.
NOTE: If there is a conflict between two or more addresses, an asterisk appears next to the port type in the System Devices menu.
Audio
Enables the audio controller. Options are PnP OS (the default), Enabled, and Disabled. It is recommended that you retain the default settings.
Security Menu Options
The following subsections explain each option in the Security menu of the Setup program (see Figure
Main System Devices
Setup Utility
Security Power Boot Exit
System Password is | Clear |
Set System Password | [Enter] |
Password On Boot | [Disabled] |
Item Specific Help
F1 Help | Select | Item | F5/F6 | Change | Values | F9 Setup | Defaults |
ESC Exit | Select | Menu | Enter | Select | F10 Save | and Exit |