Chapter 4
Removing and Replacing Parts
This chapter provides procedures for removing the components, assemblies, and subassemblies in the system unit. Unless otherwise noted, each procedure assumes the following:
•You have performed the steps in “Precautionary Measures” found later in this chapter.
•You have removed the computer covers.
•You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided.
Recommended Tools
Most of the procedures in this chapter require the use of one or more of the fol- lowing tools:
•Small
•Wide
•Number 1 and number 2
•
•
•Tweezers or
•Small plastic scribe
Also, use a wrist grounding strap as explained in the next section, “Precaution- ary Measures.”
Removing and Replacing Parts |
