System Board Components

The subsections that follow contain procedures for removing system board components.

diskette/tape drive interface	Ultra/Narrow SCSI host adapter	Ultra/Wide SCSI host adapter
connector (FLOPPY)	connector (SCSI2 CD-ROM)	connector (BACKPLANE SCSI1)

EISA connectors

(EISA1 [top], EISA2,

and EISA3)

PCI connectors (PCI4 [top]–PCI8)

battery connector (BATTERY)

power supply connector (POWER2)

power supply connector (POWER1)

video connector (MONITOR)

server-management

serial port connector

(REMOTE)

parallel port connector

(PARALLEL)

DIMM sockets

(DIMM A [top]–DIMM H)

fan connectors

(FAN1, FAN2, FAN3)

speed and configuration jumpers

serial port 2 connector (SERIAL2)

serial port 1 connector (SERIAL1)

primary microprocessor

socket (PROCESSOR1)

power supply connector (POWER3)

server-management bus connector (SMB BACKPLANE)

Figure 4-16. System Board Components

Removing and Replacing Parts 4-17