Dell 200, 4100, 180 service manual Table A-4. Advanced Menu Categories

Table A-4. Advanced Menu Categories
Category	Function
Serial Port 1 or	Configures system’s built-in serial ports.
Serial Port 2
Parallel Port	Configures system’s built-in parallel port.
	The port’s I/O address may be set to:
	278H, IRQ5; 3BCH, IRQ7; 378H, IRQ7.
	Otherwise, the port may be disabled.
Parallel Mode	Controls whether system’s built-in parallel
	port acts as an AT-compatible (Output
	Only), PS/2-compatible (Bidirectional), or
	ECP (extended capabilities port).
Diskette Controller	Enables system’s built-in diskette
	controller.
On-Board SCSI A	Enables or disables the built-in SCSI 7880
	Ultra/Wide controller and determines if it is
	scanned as a boot drive.
On-Board SCSI B	Enables or disables the built-in SCSI 7860
	Ultra/Narrow controller and determines if
	it is scanned as a boot drive.
PCI Scan Sequence	Determines the sequence the PCI devices
	are scanned to find a boot device (default is
	Embedded devices first).
Use MP Specification	Determines the microprocessor-
	specification revision level: either 1.1 or
	1.4 (default).
PS/2 Mouse	Enables or disables the built-in mouse con-
	troller.

System Setup Program A-7