Dell 180, 4100, 200 service manual Microprocessor and Heat Sink, Microprocessor Configuration

Microprocessor and Heat Sink

microprocessor socket

clip

heat sink

thermal pad

(bonded to heat sink)

microprocessor

pin-1 corner of socket

front tab

Figure 4-20. Microprocessor Configuration

The computer may have two microprocessors. To remove a microprocessor and heat sink, follow these steps:

1.Remove the microprocessor securing clip from the microprocessor/heat sink assembly.

WARNING: The microprocessor chip can get extremely hot during system operations. Be sure the chip has had sufficient time to cool before touching it.

Press down on the folded part of the clip with a small screwdriver to release the clip (see Figure 4-21).

4-20 Dell PowerEdge 4100/180 and 4100/200 Systems Service Manual