Dell 7130cdn manual Click Properties

Network Basics

Information Required for Manual IP Addressing

Default Router/Gateway address

Router address is required to communicate with the host device from anywhere other than the local network segment.

Using the Control Panel

To manually set the IP address:

1.On the control panel, select Printer Setup > Connection Setup > Network Setup > TCP/IPv4 Setup, then press the OK button.

2.Select DHCP/BOOTP, then press the OK button to select Off.

3.Select IPv4 Address, then press the OK button.

4.Enter the printer’s IP address, then press the OK button.

Changing or Modifying the IP Address Using the Embedded Web Server

The Embedded Web Server provides a simple interface that enables you to manage, configure, and monitor networked printers from your desktop using an embedded Web server. For complete information about the Embedded Web Server, click the Help button in the Embedded Web Server to go to the EWS Online Help.

After setting the printer’s IP address, you can modify TCP/IP settings using the Embedded Web Server.

1.Launch your Web browser.

2.Enter the printer’s IP address in the browser’s Address field.

3.Click Properties.

4.Select the Protocols folder on the left navigation panel.

5.Select TCP/IP.

6.Enter or modify the settings, and then click Save Changes at the bottom of the page.

See also:

System Administrator Guide at www.support.dell.com

22Dell 7130cdn Professional Color Printer User Guide