Dell 7130cdn manual Printing on Glossy Paper

Printing

Printing on Glossy Paper

Glossy paper can be printed from any tray within the following weight range:

•Thin Glossy Paper: 106–169 g/m2

•Glossy Paper: 170–220 g/m2

•Thick Glossy Paper: 221–256 g/m2

Note: Glossy paper should be printed on one side only.

To order paper, transparencies, or other specialty media, contact your local reseller or go to the Dell Supplies website for your printer: www.dell.com/supplies.

Guidelines

•Do not open sealed packages of glossy paper until you are ready to load them into the printer.

•Leave glossy paper in the original wrapper, and store unopened packages in the original shipping carton until ready to use.

•Remove all other paper from the tray before loading glossy paper.

•Load only the amount of glossy paper you plan to use and remove the unused portion from the tray when you are finished printing. Replace the unused portion in the original wrapper and seal for later use.

•Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to curl and jam in the printer.

Note: Use the Calibrate for Paper menu to adjust the printer for each type of glossy media. Calibration only uses Tray 1 (MPT). Place at least 9 sheets of the media to be calibrated in Tray 1 (MPT). Review each of the 9 reference pages printed and adjust the toner transfer settings for optimal results. For more information, see Calibrating the Paper Type on

page 122.

60Dell 7130cdn Professional Color Printer User Guide