Dell 7130cdn manual Choosing a Connection Method, Connecting via Ethernet Recommended

Network Basics

Choosing a Connection Method

Connect the printer via Ethernet or USB. A USB connection is a direct connection and is not used for networking. An Ethernet connection is used for networking. Hardware and cabling requirements vary for the different connection methods. Cabling and hardware are generally not included with your printer and must be purchased separately. This section includes:

•Connecting via Ethernet (Recommended) on page 17

•Connecting via USB on page 18

Connecting via Ethernet (Recommended)

Ethernet can be used for one or more computers. It supports many printers and systems on an Ethernet network. An Ethernet connection is recommended because it is faster than a USB connection. It also allows you direct access to the Embedded Web Server (EWS), which enables you to manage, configure, and monitor network printers from your computer.

Network Connection

Depending on your particular setup, the following hardware and cabling is required for Ethernet.

•If you are connecting to one computer, an Ethernet RJ-45 crossover cable is required.

•If you are connecting to one or more computers with an Ethernet hub, or cable or DSL router, two or more twisted-pair (category 5/RJ-45) cables are required. (One cable for each device.)

If you are connecting to one or more computers with a hub, connect the computer to the hub with one cable, and then connect the printer to the hub with the second cable. Connect to any port on the hub except the uplink port.

See also:

Configuring the Network Address on page 19

Available Printer Drivers on page 24

Dell 7130cdn Professional Color Printer	17
User Guide