Dell 720N, 740N, 760N 'LVSOD\LQJ7DSH'HYLFH,QIRUPDWLRQ

14-2 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide
'LVSOD\LQJ7DSH'HYLFH,QIRUPDWLRQ
'HVFULSWLRQ
Before you use the dump command to back up to a tape device attached to the filer,
verify that the filer detects the device. Also, verify the device name to be included in
the dump command.
6WHSIRU'LVSOD\LQJ,QIRUPDWLRQ$ERXW4XDOLILHG7DSH
'HYLFHV
To display information about qualified tape devices, enter the following command:
sysconfig -t
6WHSVIRU'LVSOD\LQJ1RQTXDOLILHG7DSH'HYLFHV
To display information about nonqualified tape devices, perform the following steps:
1. If the filer has accessed the tape drive through the dump or mt command, go to
Step 3. Otherwise, go to Step 2.
2. Enter the following command to access the tape device:
PWIGHYLFHVWDWXV
3. Enter the following command:
V\VFRQILJW
6WHSVIRU'LVSOD\LQJ,QIRUPDWLRQ$ERXW7DSH6WDFNHUV
To display information about tape stackers, perform the following steps:
1. If the tape st ackers autoload setting is On, go to Step 2.
If the tape stackers autoload setting is Off, go to Step 4.
2. Turn off the autoload setting of the tape stacker.
3. Reboot the filer.
4. Enter the following command:
V\VFRQILJP