A-64 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide
symbolic links and will repeatedly loop on them. Users should use
caution when changing this option.
cifs.symlinks.enable
When cifs.symlinks.enable is on (the default), if the object being
accessed by a CIFS client is a symbolic link (whether absolute or
relative), the filer follows the link with the proviso that the ultimate
target turns out to reside within the originating share (thus ensuring
that the client has access permission to the target).
cifs.trace_login
When cifs.trace_login is on (the default is off), the filer logs all
login-related activities. This can be used to diagnose access prob-
lems on the filer.
console.encoding
Specifies how non-ASCII character information is presented. The
value can be:
nfs - NFS character set. You can use both NFS extended (> 0x7F)
and SGML characters for input.
sgml - SGML character format. You can use both NFS extended
(greater than 0x7F) and SGML characters for input.
utf8 - UTF-8 character sets. For input, any character greater than
0x7F is the beginning of a UTF-8 encoding.
The default is nfs.
dns.domainname
Sets the DNS domainname to the specified domainname.
dns.enable Enables DNS client on the filer. The DNS domain must be set and
the /etc/resolv.conf file must exist prior to enabling DNS.
ip.path_mtu_discovery.enable
Enables/disables path MTU discovery; it is currently used only by
TCP. Path MTU discovery allows a host to discover the maximum
transmission unit, i.e. the largest link-level packet that can be trans-
mitted, over a path from that host to another host. This means that
the filer neednt choose a conservative packet size for a TCP con-
nection to a host not on the same net as the filer, but can attempt
to discover the largest packet size that can make it to the other host
without fragmentation.
httpd.enable
Enables HTTP access to the filer.
httpd.admin.enable
Enables HTTP access to the administration area of the filer, via a pri-
vate URL: any URL beginning with /na_admin is mapped to the
directory /etc/http. Thus, a man page on the filer filer with the file
options