19-18 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide
7KHFRQVROHHQFRGLQJ2SWLRQ
'HIDXOW
nfs
'HVFULSWLRQ
Table 19-1 specifies how non-ASCII character information is presented. The value can
be one of the following.
7KHLSPDWFKBDQ\BLIDGGU2SWLRQ
'HIDXOW
On
'HVFULSWLRQ
If the option is On (the default), the filer accepts any packet that is addressed to it
even if that packet came in on the wrong interface.
NOTE: If you are concerned about security, you should turn this Off.
7KHLSSDWKBPWXBGLVFRYHU\HQDEOH2SWLRQ
'HIDXOW
On
'HVFULSWLRQ
Enables or disables path MTU discovery, which is currently used only by TCP. When
enabled, the filer can discover and use the largest packet size that the filer can send to
another host without fragmenting a packet. This means that the filer doesnt have to
limit itself to sending many small packets, which takes more time and resources than
sending fewer large packets.
7DEOHFRQVROHHQFRGLQJ9DOXHV
9DOXH 'HVFULSWLRQ
nfs NFS character set. You can use both NFS extended (greater than
0x7F) and SGML characters for input.
sgml SGML character format. You can use both NFS extended (greater
than 0x7F) and SGML characters for input.
utf8 UTF-8 character sets. For input, any character greater than 0x7F is
the beginning of a UTF-8 encoding.