| Condition |
|
|
| NOTE: The drive status indicator remains off until all |
| drives are initialized after system power is applied. |
| Drives are not ready for insertion or removal during |
| this time. |
Blinks green, amber, and turns off | Drive predicted failure |
Blinks amber four times per second | Drive failed |
Blinks green slowly | Drive rebuilding |
Steady green | Drive online |
Blinks green three seconds, amber three seconds, and | Rebuild aborted |
turns off six seconds |
|
Node status indicators
Figure 4. Node status indicators |
|
| |
1. | node A status indicator | 2. | node B status indicator |
3. | node C status indicator | 4. | node D status indicator |
There is an indicator for each of the four nodes, on the front panel of the sled. The node status indicators provide the following information.
Indicator Pattern | Description |
Off | The node is powered off. |
Solid blue | The node is powered on. |
Blinking blue | The node is identified. |
10
