7
Jumpers and connectors
System board jumper settings
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: Each node in the sled has separate configuration jumpers. To locate the jumpers for each node, see System Board Connectors.
For information on resetting the password jumper to disable a password, see Disabling A Forgotten Password.
Table 4. System board jumper settings
Jumper | Setting | Description |
|
|
|
NVRAM_CLR |
| The configuration settings are retained at system boot. |
|
| (default) |
The configuration settings are cleared at the next system boot. (If the configuration settings become corrupted to the point where the system does not boot, install the jumper and boot the system. Remove the jumper before restoring the configuration information.)
PWRD_EN | The password feature is enabled. |
| (default) |
The password feature is disabled.
62
