Menu Item | Description |
Port B | Auto enables BIOS support for the device attached to SATA port B. Off disables BIOS support |
| for the device. By default, Port B is set to Auto. |
Boot Settings screen | |
Menu Item | Description |
Boot Mode | Allows you to set the boot mode of the system. |
| CAUTION: Switching the boot mode may prevent the system from booting if the operating |
| system is not installed in the same boot mode. |
| If the operating system supports UEFI, you can set this option to UEFI. Setting this field to BIOS |
| allows compatibility with |
| to BIOS. |
| NOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting this field to |
| BIOS disables the UEFI Boot Settings menu. |
Boot Sequence Retry | Allows you to enable or disable the boot sequence retry feature. If this field is enabled and the |
| system fails to boot, the system reattempts the boot sequence after 30 seconds. By default, the |
| Boot Sequence Retry option is set to Disabled. |
BIOS Boot Settings | Allows you to enable or disable BIOS Boot options. |
| NOTE: This option is enabled only if the boot mode is BIOS. |
UEFI Boot Settings | Allows you to enable or disable UEFI Boot options. The Boot options include IPv4 PXE and IPv6 |
| PXE. By default, the UEFI PXE boot protocol is set to IPv4. |
NOTE: This option is enabled only if the boot mode is UEFI.
Integrated Devices screen
Menu Item | Description |
User Accessible USB | Allows you to set the user accessible ports. Selecting All Ports Off disables all USB ports. By |
Ports | default, the User Accessible USB Ports option is set to All Ports On. |
Embedded NIC1 and | Allows you to enable or disable the Operating System interface of the embedded NIC1 and |
NIC2 | NIC2 controller. By default, the Embedded NIC1 and NIC2 option is set to Enabled. |
OS Watchdog Timer | Allows you to enable or disable the OS wacthdog timer. When this field is enabled, the |
| operating system initializes the timer and the OS watchdog timer helps in recovering the |
| operating system. By default, the OS Watchdog Timer option is set to Disabled. |
Serial Communications screen
Menu Item | Description |
Serial Communication Allows you to enable the COM port or Console Redirection options.
19
