1
About your system
This document provides information on the Dell PowerEdge FM120x4 systems, installed in the Dell PowerEdge FX2 enclosure. For information on the enclosure components, including shared resources like the power supplies, Chassis Management Controller (CMC), cooling fans, and I/O modules, see the Dell PowerEdge FX2 and FX2s Enclosure Owner’s Manual at dell.com/poweredgemanuals.
Terms used in the document
The following table describes the terms used in this document.
Term | Description |
|
|
Enclosure | Refers to the PowerEdge FX2 enclosure. |
Sled or system | Refers to the PowerEdge FM120x4 system. |
Nodes | Refer to the four compute nodes (Intel Atom C2000 |
| processors) in the FM120x4 sled. Each node functions as |
| an independent server and can be remotely managed |
| through individual iDRACs. |
Refers to the slots on the sled front panel in which the | |
| hard drives/SSDs are installed. |
Warm swap | A component is considered warm swap if the node |
| associated with the component must be turned off before |
| adding or replacing the component. However, the sled and |
| the rest of the nodes remain powered on. |
Hot swap | A component is considered hot swap if it can be removed |
| or installed while the nodes and the sled are powered on. |
7
