Configuring Load Segments
Load segments are sets of receptacles that can be controlled by the Dell UPS Management Software, the Dell Network Management Card, or through the LCD display, providing an orderly shutdown and startup of your equipment. For example, during a power outage, you can keep key pieces of equipment running while you turn off other equipment. This feature allows you to save battery power.
Each Dell Online Rack model has two configurable load segments. See “UPS Rear Panels” on page 15 for the load segment locations.
To control the load segments with power management software, see your power management software manual for details (refer to the Software CD or www.dell.com for the latest information).
Controlling Load Segments Through the Display
To control the load segments through the display:
1Press the 
button for longer than one second to go to the main menu selection and scroll down to the Control menu using the 
button.
2Press the 
button to enter the Control menu.
3Use the 
button to scroll to Load Segments.
4Press the 
button.
The current setting for the option flashes when selected.
5Select the desired load segment using the 
and 
buttons.
6Set the desired load segment ON or OFF using the 
button.
7Press the 
button for longer than one second to confirm.
8Set the other load segment if applicable.
Operation 49
