![](/images/new-backgrounds/1188033/188033223x1.webp)
Main
System Information | Displays the system name |
|
|
BIOS Version | Displays the BIOS version number |
|
|
System Date | Displays the current date in mm/dd/yyyy format |
|
|
System Time | Displays the current time in hh:mm:ss format |
|
|
Service Tag | Displays the service tag of the computer when the service tag is present |
Asset Tag | Displays the asset tag of the computer when the asset tag is present |
|
|
Processor |
|
Information |
|
|
|
Processor Type | Displays the processor information |
|
|
L1 Cache Size | Displays the L1 cache size |
|
|
L2 Cache Size | Displays the L2 cache size |
|
|
L3 Cache Size | Displays the L3 cache size |
|
|
Memory Information |
|
|
|
Memory Installed | Indicates the amount of memory installed in MB |
Memory Available | Indicates the amount of memory available in MB |
|
|
Memory Speed | Indicates the memory speed in MHz |
|
|
Memory Technology | Indicates the type of installed memory |
|
|
Device Information |
|
SATA 0 | Displays the SATA drive connected to the SATA 0 connector |
|
|
SATA 1 | Displays the SATA drive connected to the SATA 1 connector |
|
|
Advanced |
|
|
|
CPU Configuration | • |
| • Multi Core Support — All; 1; 2 (All by default) |
| • Limit CPUID Value — Enabled or Disabled (Disabled by default) |
| • CPU XD Support — Enabled or Disabled (Enabled by default) |
| • Intel Virtualization Technology — Enabled or Disabled (Enabled by default) |
| • Intel(R) SpeedStep — Enabled or Disabled (Enabled by default) |
|
|
System | • Onboard Audio Controller — Enabled or Disabled (Enabled by default) |
Configuration | • Onboard LAN Controller — Enabled or Disabled (Enabled by default) |
| • Onboard LAN Boot ROM — Enabled or Disabled (Disabled by default) |
| • SATA Mode — IDE Mode or AHCI Mode (AHCI Mode by default) |
| • USB Controller — Enabled or Disabled (Enabled by default) |
| • DVMT/FIXED Memory — 128MB; 256MB; Maximum (256MB by default) |
|
|
Power Management | • AC Recovery — Power On; Power Off; Last Power State (Power Off by default) |
| • Remote Wake Up — Enabled or Disabled (Enabled by default) |
| • Auto Power On — Enabled or Disabled (Disabled by default) |
| • Auto Power On Date — 0 to 31 (15 by default) |
| • Auto Power On Hour — 0 to 23 (12 by default) |
| • Auto Power On Minute — 0 to 59 (30 by default) |
| • Auto Power On second — 0 to 59 (30 by default) |
|
|
Post Behavior | • Numlock Key — On or Off (On by default) |
| • Keyboard Errors — Report or Do Not Report (Report by default) |
|
|
Security |
|
|
|
Admin Password | Allows to set, change, or delete the administrator password |
| NOTE: Deleting the administrator password will delete system password. Hence, the administrator password must be set before |
| setting the system password. |
|
|
System Password | Allows to set, change, or delete the system password |
|
|
Password on Boot | Enabled or Disabled (Enabled by default) |
|
|
Boot |
|
|
|
1st Boot Priority | Specifies the boot sequence from the available devices |
| USB Storage Device; Hard Drive; |
2nd Boot Priority | Specifies the boot sequence from the available devices |
| USB Storage Device; Hard Drive; |
|
|
|
|