Back to Contents Page
MXM Assembly (Optional)
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the MXM Assembly
Replacing the MXM Assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: The MXM assembly may be very hot during normal operation. Ensure that it has had sufficient time to cool before you touch it.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
Removing the MXM Assembly
1.Follow the instructions in Before You Begin.
2.Remove the back cover (see Removing the Back Cover).
3.Follow the instructions from step 2 to step 5 in Removing the Front Stand.
4.Remove the
5.Remove the
6.Remove the three screws that secure the
7.Remove the MXM assembly from the
NOTE: The appearance of the system board may vary based on your computer model.
1 | MXM assembly connector | 2 | MXM assembly |
|
|
|
|
|
|
3 | screws (3) |
|
|
|
|
|
|
|
|
Replacing the MXM Assembly
1.Follow the instructions in Before You Begin.
2.Align the notch on the MXM assembly with the tab in the
3.Insert the MXM assembly at a
4.Replace the three screws that secure the MXM assembly to the chassis.
