Back to Contents Page
MXM-Assembly Fan (Optional)
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the
Replacing the
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
Removing the MXM-Assembly Fan
1.Follow the instructions in Before You Begin.
2.Remove the back cover (see Removing the Back Cover).
3.Follow the instructions from step 2 to step 5 in Removing the Front Stand.
4.Remove the
5.Disconnect the
6.Remove the two screws that secure the
7.Carefully peel the silver foil from the
8.Lift the
NOTE: The appearance of the system board may vary based on your computer model.
1 | 2 | screws (2) |
| |
|
|
|
|
|
3 |
|
|
| |
|
|
|
|
|
|
|
|
|
|
Replacing the MXM-Assembly Fan
1.Follow the instructions in Before You Begin.
2.Align the screw holes on the
3.Adhere the silver foil to the
4.Replace the two screws that secure the
