Dell L701X manual Removing the USB Board

Back to Contents Page

USB Board

Dell™ XPS™ L701X Service Manual

Removing the USB Board

Replacing the USB Board

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.

Removing the USB Board

1.Follow the instructions in Before You Begin.

2.Remove the battery (see Removing the Battery).

3.Remove the module cover (see Removing the Module Cover).

4.Remove the memory module(s) (see Removing the Memory Module(s)).

5.Follow the instructions in step 5 in Removing the Hard Drive(s).

6.Remove the optical drive (see Removing the Optical Drive).

7.Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).

8.Remove the keyboard (see Removing the Keyboard).

9.Remove the display assembly (see Removing the Display Assembly).

10.Remove the Mini-Card(s) (see Removing the Mini-Card(s)).

11.Remove the bluetooth card (see Removing the Bluetooth Card).

12.Follow the instructions from step 13 to step 18 in Removing the Top Cover.

13.Turn the top-cover assembly over.

14.Lift the connector latch and disconnect the USB-board cable from the connector on the USB board.

15.Remove the screw that secures the USB board to the top cover.

16.Carefully ease the connectors on the USB board out of the slots in the top cover, and lift the USB board off the top cover.