Dell L701X manual Removing the Display Bezel

3.Route the display cable through the routing guides.

4.Connect the display cable to the system-board connector.

5.Replace the screw that secures the display grounding cable to the top cover.

6.Connect the touch screen cable to the system-board connector.

7.Route the Mini-Card antenna cables through the routing guides.

8.Connect the appropriate antenna cables to the Mini-Cards(s) on your computer (see Replacing the Mini-Card(s)).

9.Replace the keyboard (see Replacing the Keyboard).

10.Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).

11.Replace the optical drive (see Replacing the Optical Drive).

12.Replace the two screws that secure the display assembly to the base cover.

13.Follow the instructions in step 5 in Replacing the Hard Drive(s).

14.Replace the memory module(s) (see Replacing the Memory Module(s)).

15.Replace the module cover (see Replacing the Module Cover).

16.Replace the battery (see Replacing the Battery).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

Display Bezel

Removing the Display Bezel

CAUTION: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.

1.Follow the instructions in Before You Begin.

2.Remove the display assembly (see Removing the Display Assembly).

3.Push the display bezel outwards to release it from the tabs that secure the display bezel to the back cover.

4.Using your fingertips gently pry the outside edge of the display bezel off the back cover.

5.Lift the display bezel off the display assembly.