Dell L701X manual Back to Contents

Inspiron One 2310

6.Wait for approximately five seconds to clear the CMOS setting.

7.Remove the 2-pin jumper plug from pins 1 and 2 and replace it on pins 2 and 3.

8.Replace the system-board shield (see Replacing the System-Board Shield).

9.Replace the back cover (see Replacing the Back Cover).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

10.Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page