Dell L701X manual Dimm a Dimm B Dimm C Dimm D

1. Follow the instructions in Before You Begin.

CAUTION: Install memory modules in the memory-module connectors as indicated on the following table based on the number of memory modules you are installing. Your computer may not start, if you fail to install the memory modules as indicated in the table.

	Memory-Module Connector
Number of Memory Modules	DIMM A	DIMM B	DIMM C	DIMM D
1	X
			X
2	X	X
			X	X
	X		X
3	X	X	X
	X		X	X
4	X	X	X	X

2.Align the notch in the memory module with the tab in the memory-module connector.

3.Slide the memory module firmly into the memory-module connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

NOTE: If the memory module is not installed properly, the computer may not boot.

1 tab 2 notch

3memory-module connector

4.Replace the module cover (see Replacing the Module Cover).

5.Replace the battery (see Replacing the Battery).

6.Connect the AC adapter to your computer and an electrical outlet.

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

7. Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system configuration information.

To confirm the amount of memory installed in the computer:

Click Start → Control Panel→ System and Security→ System.

Back to Contents Page