1 | palm-rest assembly | 2 | top cover |
| | | |
3 | tab | | |
| | | |
CAUTION: Carefully separate the palm-rest assembly from the top cover to avoid damage to the palm-rest assembly.
10.Using your fingertips, gently ease the palm-rest assembly from the top cover.
11.Without pulling hard on the palm-rest assembly, turn the palm-rest assembly over and place it on the top cover.
12.Lift the connector latch and pull the pull-tab to disconnect the control-strip cable from the system-board connector.
13.Lift the connector latch and pull the pull-tab to disconnect the touch-pad cable from the system-board connector.
14.Lift the palm-rest assembly off the top cover.
1 | control-strip cable connector | 2 | touch-pad cable connector | |
| | | | |
3 | top cover | 4 | palm-rest assembly | |
| | | | |
| | | | |
Replacing the Palm-Rest Assembly
1.Follow the instructions in Before You Begin.
2.Slide the touch-pad cable into the system-board connector and press down on the connector latch to secure the cable.
3.Slide the control-strip cable into the system-board connector and press down on the connector latch to secure the cable.
4.Place the palm-rest assembly on the top cover and gently snap the palm-rest assembly into place.
5.Close the display and turn the computer over.
