![](/images/new-backgrounds/1188033/188033119x1.webp)
Back to Contents Page
Processor Heat-Sink Fan
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the Processor
Replacing the Processor
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: The heat sink may be very hot during normal operation. Ensure that it has had sufficient time to cool before you touch it.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
Removing the Processor Heat-Sink Fan
1.Follow the instructions in Before You Begin.
2.Remove the back cover (see Removing the Back Cover).
3.Follow the instructions from step 2 to step 5 in Removing the Front Stand.
4.Remove the
5.Disconnect the processor
6.Remove the two screws that secure the processor
7.Carefully peel the silver foil from the processor heat sink.
8.Lift the processor
NOTE: The appearance of the system board may vary based on your computer model.
1 | processor | 2 | processor |
|
3 | screws (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacing the Processor Heat-Sink Fan
1.Follow the instructions in Before You Begin.
2.Align the screw holes on the processor
3.Replace the two screws that secure the processor