default-information originate [always [metric metric-value] [metric-type
type-value]] [route-map map-name]
Configure the following required and optional parameters:
–always: indicate that default route information is always advertised.
–metric metric-value: The range is from 0 to 4294967295.
–metric-type metric-type: enter 1 for OSPFv3 external route type 1 OR 2 for OSPFv3 external
route type 2.
–route-map map-name: enter a name of a configured route map.
Enabling OSPFv3 Graceful Restart
Graceful restart for OSPFv3 is supported on the MXL switch.
For more information about graceful restart, refer to Graceful Restart.
By default, OSPFv3 graceful restart is disabled and functions only in a helper role to help restarting
neighbor routers in their graceful restarts when it receives a Grace LSA.
To enable OSPFv3 graceful restart, enter the ipv6 router ospf process-id command to enter
OSPFv3 configuration mode. Then configure a grace period using the graceful-restart grace-
period command. The grace period is the time that the OSPFv3 neighbors continue to advertise the
restarting router as though it is fully adjacent. When you enable graceful restart (restarting role), an
OSPFv3 restarting expects its OSPFv3 neighbors to help when it restarts by not advertising the broken
link.
When you enable the helper-reject role on an interface using the ipv6 ospf graceful-restart
helper-reject command, you reconfigure OSPFv3 graceful restart to function in a restarting-only role.
OSPFv3 does not participate in the graceful restart of a neighbor.
NOTE: Enter the ipv6 ospf graceful-restart helper-reject command in Interface
configuration mode.
• Enable OSPFv3 graceful restart globally by setting the grace period (in seconds).
CONF-IPV6-ROUTER-OSPF mode
graceful-restart grace-period seconds
The valid values are from 40 to 1800 seconds.
• Configure an OSPFv3 interface to not act on the Grace LSAs that it receives from a restarting OSPFv3
neighbor.
INTERFACE mode
ipv6 ospf graceful-restart helper-reject
• Specify the operating mode and type of events that trigger a graceful restart.
CONF-IPV6-ROUTER-OSPF mode
graceful-restart mode [planned-only | unplanned-only]
–Planned-only: the OSPFv3 router supports graceful restart only for planned restarts. A planned
restart is when you manually enter a redundancy force-failover rpm command to force the
primary RPM over to the secondary RPM. During a planned restart, OSPFv3 sends out a Grace LSA
646 Open Shortest Path First (OSPFv2 and OSPFv3)