Specify the following optional parameters:
–datetime: You can add the keyword localtime to include the localtime, msec, and show-
timezone. If you do not add the keyword localtime, the time is UTC.
–uptime: To view time since last boot.
If you do not specify a parameter, the system configures uptime.
To view the configuration, use the show running-config logging command in EXEC privilege mode.
To disable time stamping on syslog messages, use the no service timestamps [log | debug]
command.
File Transfer Services
With the Dell Networking OS, you can configure the system to transfer files over the network using the
file transfer protocol (FTP).
One FTP application is copying the system image files over an interface on to the system; however, FTP is
not supported on virtual local area network (VLAN) interfaces.
For more information about FTP, refer to RFC 959, File Transfer Protocol.

Configuration Task List for File Transfer Services

The configuration tasks for file transfer services are:
•Enabling the FTP Server (mandatory)
•Configuring FTP Server Parameters (optional)
•Configuring FTP Client Parameters (optional)

Enabling the FTP Server

To enable the system as an FTP server, use the following command.
To view FTP configuration, use the show running-config ftp command in EXEC privilege mode.
• Enable FTP on the system.
CONFIGURATION mode
ftp-server enable
Example of Viewing FTP Configuration
Dell#show running ftp
!
ftp-server enable
ftp-server username nairobi password 0 zanzibar
Dell#
Management 75