SNMPv2-SMI::mib-2.47.1.1.1.1.2.8 = STRING: "Unit: 0 Port 5 10G Level"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.9 = STRING: "Unit: 0 Port 6 10G Level"
---output truncated
Troubleshooting SNMP Operation
When you use SNMP to retrieve management data from an SNMP agent on a Dell Networking router,
take into account the following behavior.
• When you query an IPv4 icmpMsgStatsInPkts object in the ICMP table by using the snmpwalk
command, the output for echo replies may display incorrectly. To correctly display this information
under ICMP statistics, use the show ip traffic command.
• When you query an icmpStatsInErrors object in the icmpStats table by using the snmpget or
snmpwalk command, the output for IPv4 addresses may display incorrectly. To correctly display this
information under IP and ICMP statistics, use the show ip traffic command.
• When you query an IPv4 icmpMsgStatsInPkts object in the ICMP table by using the snmpwalk
command, the echo response output may not display. To correctly display ICMP statistics, such as
echo response, use the show ip traffic command.
Simple Network Management Protocol (SNMP) 881