Additional MIB Objects to View Copy Statistics
Dell Networking provides more MIB objects to view copy statistics, as shown in the following table.
Table 61. Additional MIB Objects for Copying Configuration Files via SNMP
MIB Object OID Values Description
copyState .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.11
1= running
2 = successful
3 = failed
Specifies the state of the
copy operation.
copyTimeStarted .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.12
Time value Specifies the point in the
up-time clock that the
copy operation started.
copyTimeCompleted .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.13
Time value Specifies the point in the
up-time clock that the
copy operation
completed.
copyFailCause .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.14
1 = bad filename
2 = copy in progress
3 = disk full
4 = file exists
5 = file not found
6 = timeout
7 = unknown
Specifies the reason the
copy request failed.
copyEntryRowStatus .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.15
Row status Specifies the state of the
copy operation. Uses
CreateAndGo when you
are performing the copy.
The state is set to active
when the copy is
completed.
868 Simple Network Management Protocol (SNMP)